Sunday, September 04, 2011
Erich Magnetics
ERICH CIRCULAR LIFTING MAGNETS are extremely convenient and economical and find wide application in handling different kinds of scrap such as pig-iron, steel turnings, ingots, slab, cut-pieces of plates, channel beams etc.
Lifting capacity of the magnet depends upon the size of the magnet, power rating, shape and size and typical bulk density of scrap material, amount of the load in direct contact with pole faces, storage distribution and piling of scrap, temperature of scrap material and above all the skills of the crane-operator. To achieve optimum lifting capacity and the overall efficiency of the magnet it is strongly recommended that the magnet is allowed to properly rest on the scrap before switching 'ON' the magnet.
Lifting capacity of the magnet is strongly influenced by air gaps between the loose pieces of scrap. Therefore, the Circular Lifting Magnets have larger diameter to overcome the effect of air-gaps introduced by loose scrap. Lifting capacity is also reduced drastically if the scrap material is highly porous or it contains high percentage of carbon as the magnetic property reduces due to high carbon content.
Lifting capacity of the magnet depends upon the size of the magnet, power rating, shape and size and typical bulk density of scrap material, amount of the load in direct contact with pole faces, storage distribution and piling of scrap, temperature of scrap material and above all the skills of the crane-operator. To achieve optimum lifting capacity and the overall efficiency of the magnet it is strongly recommended that the magnet is allowed to properly rest on the scrap before switching 'ON' the magnet.
Lifting capacity of the magnet is strongly influenced by air gaps between the loose pieces of scrap. Therefore, the Circular Lifting Magnets have larger diameter to overcome the effect of air-gaps introduced by loose scrap. Lifting capacity is also reduced drastically if the scrap material is highly porous or it contains high percentage of carbon as the magnetic property reduces due to high carbon content.
MAGNET BODY : The Magnet body is designed so as to generate optimum magnetic field and at the same time to provide the most efficient magnetic circuit, keeping the magnet weight to the minimum, without loss of performance making these magnets most suitable for attaching to the mobile cranes in the scrap yard. The magnet body is fabricated from high permeability low carbon steel for minimum leakage and maximum magnetic lifting & holding efficiency with utmost toughness. Heat treated fully annealed centre pole, integrated outer pole, terminal box, and extra heavy duty lifting lugs are parts of the magnet body.
CENTER POLE : This is cast from high permeability low carbon steel for minimum leakage and maximum lifting capacity.
Phone: +(91)-11-22149235
Fax: +91-11-22165315
Posted in: Circular Lifting Magnets
